HOIST ACCESSORIES

MANUAL TROLLEYS

All hoists ordered with a "trolley adapter" will mount directly to the proper manual trolley model. Spark resistant trolleys come with bronze or copper-beryllium wheels. All manual trolleys must be ordered separately by specifying model required according to hoist and beam configurations.

MANUAL TROLLEY SERIES

Hoist Used On	Trolley For Standard I-Beam		Trolley For Flat Track Beam *		Min.-Max. Beam Height		Min.-Max. Beam Flange Width		Minimum Turning Radius
Hoist Used On	Std.	Spark Resist.	Std.	Spark Resist.	inches	mm	inches	mm	feet	m
AJ300 Series	7737	N / A	N / A	N / A	3 - 10	76 - 254	2 11/32 - 4 21/32	59 - 118	1 1/2	0.5
1/4 & 1/2 ton 7700 Series	7702	7761-BC	7702-FT	N / A	4 - 10	101 - 254	2 11/32 - 4 21/32	67 - 118	2	0.6
1 ton 7700 Series	7727	7762-BC	7727-FT	N / A	5 - 12	127 - 305	3 - 5 1/4	76 - 133	3	0.9
1 ton 7790 Series	7795-ARO	7763-BC	7795-FT	N / A	5 - 12	127 - 305	3 - 5 1/6	76 - 128	3 1/2	1.1
2 ton 7790 Series	7796	7764-BC	7796-FT	N / A	6 - 12	152 - 305	3 - 5 1/6	76 - 128	3 1/2	1.1

* Spark resistant trolleys are not available for Flat Track Beams.

TROLLEY ADAPTERS

STATIONARY ADAPTER

Comes with any 7700 Series hoist ordered as a trolley suspended model. Adapter can be ordered separately to convert existing hook suspended 7700 Series hoists for stationary mounting to a 7702 or 7727 Trolley. Order 47717 for 1/4 and 1/2 ton models, 47716 for 1 ton models.

43111 90º TROLLEY ADAPTER

Used to mount any 7790 Series hoist parallel to suspension beam.

POWER TROLLEY CONVERSION KIT

The Power Trolley Kit comes complete to convert both 7700 and 7790 Series pull chain and pendant control hoists to a power trolley system. Kits for 7700 Series include the Power Trolley Adapter (45591-2)* and two Roll Pins (45628)* to mount to the hoist housing. The four-lever, dual-motor pendant control handle operates hoist lift/descent and trolley movement. Trolleys should be ordered according to type of hoist and beam configurations.

* Not shown

Frees operator from pushing and pulling suspended loads.
Eases transfer of heavy loads and reduces cycle times.
Offers variable traverse speed ranges from creep to 70 ft/min.
Easy-to-install, compact and lightweight designs.
Fits 8 ft (203mm) to 12 ft (305mm) flat and tapered beams.

Hoist Used On
Kit For Standard I-Beam
Kit For Flat Track Beam
Min.-Max. Beam Height
Min.-Max. Beam Width

inches mm inches mm

1/2 and 1 ton 7700 Series
7797-ST-1C* 7797-FT-1C* 8 - 12 203 - 305 3 1/4 - 5 1/2 82.5 - 129.7

1 & 2 ton 7790 Series
7797-ST-2C* 7797-FT-2C* 8 - 12 203 - 305 3 1/4 - 5 1/2 82.5 - 129.7

* Air Consumption: 28 cfm (0.79m^3/min)
C=6 ft, D=7 ft, E=8 ft through S=20 ft. Omit "I" and "O" from sequence.

Warning: This equipment is not to be used for lifting, supporting, or transporting people, or lifting or supporting loads over people.

| NEXT PAGE |

| BACK |